Different preparation techniques can be envisaged depending on the condition of the support, such as, for example, chemical pickling, mechanical cleaning, scarification, sandblasting, high pressure cleaning, thermal pickling. The general condition of the substrate determines the most suitable techniques to use. Trowel laying, trowel laying, laying with ruler, laying with guides, final finishing by hand, final machine finishing, helicopter, How do we do it? Make a screed, make a patch, make a screed in reinforced concrete. Different RESIMARMO® products are used. RESIPRIMER (Promoter of adhesion, it allows to favor adhesion to the support). RESIMPER (solves problems related to poor sealing). RESIFIX(Single-component polyurethane resin, mixed with marble aggregate, creates the RESIMARMO® compound which can be applied to a rigid and solid surface). RESIPROTEC (Polyurethane resin, it constitutes the finishing step in the case of use with an intense passage). The profiles define the area of application of RESIMARMO® and serve as a reference in order to guarantee a constant coating thickness. It is advisable to use anodised aluminum profiles. The thickness of the profiles can be between 8 and 15 mm. The greater the surface irregularity, the thicker the profile. They will be cut to the exact measurement to obtain a final result of high quality, which also includes the cutting of the angles at 45 °. To fix the profiles, a hot glue gun is the most suitable method. The glue gun, is an electric tool for melting and applying hot-melt adhesive into sticks. A trigger advances the glue stick as it merges. This method of sizing is to be preferred because once applied, the adhesive solidifies quickly. Thanks to its fast grip, it allows to correct the variations in the level of the support, on which RESIMARMO® will be applied.
The phases of work More and more often, customers express the desire to do it themselves, their project of outdoor terraces. Apart from the satisfaction of doing on his own, his work, the need to save his money pushes most customers to pose alone, their marble gravels. In fact, the installation is about 30% of the overall sum of the project. These “precious euros”, we propose you to use them for other things, making your own pose, and we have provided many aids for this realization. A basic training for the installation of your RESIMARMO® soil accompanies each of you during the duration of its project. It explains to customers, even without special skills, how to install its marble gravels. To help you succeed, one documentation and of the advices are ready to accompany you throughout the laying of your marble gravel. Immediately after the signature of the order […]
The techniques The techniques RESIMARMO The techniques of preparation of the support: Different techniques for preparing the support can be envisaged according to its state, such as for example: Chemical stripping, Mechanical cleaning, Scarification, Sandblasting, High pressure cleaning, Thermal stripping. The techniques of poses The general condition of the substrate determines the most suitable techniques to use. Troweling, Fixing to the trowel, Pose to the rule, Installation with guides, Final finishing by hand, Final machine finishing, Final surfacing with the electric helicopter, The techniques for stable supports How do we do it ? How to apply the right techniques ? Make a lean or Make a reinforced concrete screed. Make a patch, Different RESIMARMO® products are used. RESIPRIMER (adhesion primer, it allows to favor adhesion to the support). RESIFIX (single component polyurethane resin, mixed with marble aggregate, creates the RESIMARMO® compound which can […]