Pages

The resins

The marble resin - Resin pot RESIFIX

Resin pot RESIFIX.

 

Resine Prices

Marble resin

A marble resin is a polymeric product (natural, artificial or synthetic) that is a basic material for the manufacture of plastics, textiles, paints (liquid or powder), adhesives, varnishes, polymer foams, etc. It can be thermoplastic or thermosetting.

A solid or semi-fluid, vitreous, flammable, water-insoluble, yellow or brown-coloured organic substance, spontaneous or induced exudation of certain plants, particularly conifers and terebinthaceous plants (this substance extracted from pine and fir).

 

Pine resin

Pine resin.

We don’t say « plastics »anymore, we say « resin. »

In a reinforced plastic material, marble resin, also known as a matrix, is a very fluid or highly viscous matrix, used as a binder to make contact between the various reinforcing particles, such as fibres, balls or microspheres (small spherical geometry particle with a diameter of the order of one micrometer[between 1 µm and 1 mm]. The micro-spheres are sometimes called « micro-particles » or « microbead » of glass.
For example, SMC (Sheet Moulding Compound) prepregs include polyester resin, reinforcement (matt, fabric or fibre), fillers and a pre-mixed catalyst (hardener). This ready-moulded mixture for hot compression molding is in sheet form.

Since the term « plastic » has a pejorative connotation for some consumers, the word « resin » is often used by manufacturers in place of « plastic » and marble resin follows the same logic.

The SPI coding system for the identification of resins is a code developed in 1988 by the Society of the Plastics Industry to facilitate the sorting and recycling of plastic bottles and containers.

It is adopted in Germany as DIN 6120, then in Europe, and is applied voluntarily by manufacturers, but must nevertheless comply with a precise codification in accordance with a European Commission decision of 28 January 1997 (97/129/EC).

Technical certifications obtained

  • ETA : European Technical Assessment document Nº 06/0263 – CE marking : 10 and 25 years.
  • Flat roof external fire exposure Nº 06/32301345
  • Roof 45º fire resistance Nº 08/32309237
  • Root perforation no RESIMPER Nº 07/32305556 with RESIMPER Nº 07/32305557
  • Abrasion Taber Nº 10/101.729-1626
  • QUALICONSULT : Notebook of Technical Terms CCT nº 50 712 004 096 MS
  • BBA : British Board of Agreement 11/4836
  • IETcc report 19.221-II (2007) on thermal resistance.

 

The marble resin - RESIMARMO Technical Certifications

 

 

 

 

The marble resin - Logo of color

 

 

Video

GALLERY

A « slideshow » gallery

for our visitors

 

As its name suggests, this gallery reproduces the concept of the slideshow: the visuals are displayed on the screen and are driven out one after the other in turn in an automatic predefined order. The slideshow gallery have become so popular that they are now an integral part of the Net 2.0 landscape.

The main advantage of using these gallery is their dynamism. The transitions between the visuals create a movement that captivates the eye and arouses the interest of visitors. No one gets bored on our sites !

So we have created this photo gallery for you.

Therefore, you have full control over the photos that scroll through this slideshow gallery.

The speed of presentation of the different photos has been set to 4000 milliseconds, which is an average speed for a slideshow gallery like the one we programmed for you.

You can stop scrolling whenever you want, by hovering with your mouse over the picture that caught your attention.

If you want to see a picture that has already been presented, place yourself on the last one displayed, the slideshow gallery will stop and you will see rafters (<) and (>) on each side of the picture.

The one on the left (<) will allow you to step back in the slideshow gallery while the one on the right (>) will allow you to move forward in the presentation of the photos.

 

[metaslider id=626]

 

Creating a photo gallery on a website is relatively simple, but to achieve the objective of demonstrating the product on display with photos requires sensitivity and pragmatism.

 

 

We have tried to show you pictures of various but representative realizations of the different possible uses of an innovative and modern floor covering like RESIMARMO®.

  • Terraces
  • Swimming pool beaches in different shapes
  • Solariums by the pool or not
  • House or property entrances
  • Patterns embedded in the coating.
  • Lighting also embedded in the terrace
  • Several types of stairs
  • Symmetrical or non-symmetrical decorations
  • Straight or rounded edges
  • Mixed colours
  • Light or darker colours
  • Finally, in general, there are lots of possibilities that will make your floors unique.

We will make this slideshow lively, by regularly integrating new photos of realizations coming from our customers and which we will appear to bring new ideas or particularly original realizations. Upcoming photos are already in the laboratory to undergo the transformations necessary for a presentation on the web. Believe me, there are some nice surprises waiting for you. Come back soon!

You can reach us at the following e-mail addresses:

 

commercial.service@resimarmo.com

technical.service@resimarmo.com

 

Or by phone at the following number:

 

The gallery - Phone number

 

TO BECOME PARTNER

Complete this form to become a RESIMARMO Distributor.
  • For maximum security on our sites, you are invited to solve this puzzle. Write your answer below the CAPTCHA field.
  • Ce champ n’est utilisé qu’à des fins de validation et devrait rester inchangé.

 

 

The gallery - Logo of color

Simple products

 

The marble aggregates - Prices in the world

Prices in the world.

 

RESIMARMO® Product Prices

The marble aggregates - Price marble aggregatesThe marble aggregates, a noble product and design

The marble aggregates - Resine Prices

The marble aggregates form a top-of-the-range covering composed of 100% marble gravel. Non-slip, draining or waterproof. It can be installed both indoors and outdoors.

 

 

 

The marble aggregates - Marble aggregates and profiles

Marble aggregates and profiles.

 

For a long time now carpeting has no longer been applied to the floor, PVC floors and floors have gone out of fashion as well, and the coolness of the tiles has discouraged more than one.
The marble aggregates are a good alternative: it is a noble, unique, innovative and beautiful product.

 

The marble aggregates - Pool of a Nice customer in France

Pool of a Nice customer in France.

 

The marble aggregates: This year, I’m building my house! But so much work!  First the terrace! The swimming pool is very beautiful but it will have to be highlighted because the floor is completely out of use…

Today, when you settle down, either, you choose a « turnkey » property: you put your luggage down and you are quiet, no work!
Either one invests in a property that is less expensive but in which there will be more work to be done. In this case, the possibilities of having a house or apartment that looks like us will be more important.
In our time, more and more French people are placing great importance on feeling at home and making their homes a place that looks like them:

  • wall colour,
  • choice of furniture,
  • layout…

But also the floor covering.

  • Carpet,
  • floor,
  • PVC,
  • Tiles…

A large panel !
What to choose when you want a design floor that is out of the ordinary ?
Unlike tiles, marble aggregates form a non-slip, draining surface for added safety. No more puddles on the terrace and no more children’s falls or unexpected slips. It is in perfect safety that one can evolve on a marble granulate floor.
Its little plus is that it doesn’t fade over time.

So, the sun can heat up as long as it wants, your floor will always remain marble !

 

 

 

 

 

The marble aggregates - Logo of color

 

The marble aggregates

 

The marble aggregates - Color Verde alpi

Color Verde alpi.

 

The marble aggregates - Table tonnage area thicknessThe marble aggregates - Prices marble aggregate.The marble aggregates are naturally eroded to remove sharp edges and make the soft contact under the feet.
The decorative marble aggregates of the RESIMARMO® range are extraordinarily resistant to mechanical stresses. The reflections of each of the shades will allow you to create unique surfaces both in pedestrian and pedestrian way.
All these products available in washed and dried (PREMIUM), are compatible for the realization of drainage floors in aggregates plus resin.
These mineral aggregates are very luminous because marble is a material that reflects a lot of light. Your mineral space will therefore be considerably cleared with this type of aggregate.
These products, once washed and dried in suitable large drums which can contain several tons, are compatible for producing asphalt mixes.
These decorative aggregates semi rolled in large mechanical drums are products of our own manufacture, therefore 100% Italian ! Their rounded shape gives them a very pleasant softness under the feet.
These aggregates are mostly made of marble, and are the most requested by all of our customers. You have below a wide choice of colors for the realization of your outer mineral space, inside the house as in the garden. The richness and nuances of colors will allow you to create an original space, the only limits will be « your imagination ».

The whole of our collection consists of Marble and of quartz. The Quartz aggregates are mainly used to make figures embedded in the marble aggregates. Practically everything you want is possible, from logos to drawings, animal images or anything else you would like to see under your feet in the thickness of your floor-covering made of marble. The latter can be used for the mineral decoration of your gardens, patios, terraces, or even inside your home to give a touch of light color out of the ordinary. These are unique and rare pieces coming directly from Brazil. The latter can be used for the mineral decoration of your gardens, patios, terraces, or even inside your home to give a touch of light color out of the ordinary.
Contact us so that we can study together your project and advise you at best.

 

The marble aggregates - Phone-number

 

 

Please contact us by e-mail:

commercial.service@resimarmo.com

 

technical.service@resimarmo.com

 

 

 

The marble aggregates - Logo of color

 

 

Phases of work

The phases of work

 

 

11-push on the equalizer during spreading RESIMARMO

Push on the equalizer during spreading RESIMARMO.

More and more often, customers express the desire to do it themselves, their project of outdoor terraces. Apart from the satisfaction of doing on his own, his work, the need to save his money pushes most customers to pose alone, their marble gravels. In fact, the installation is about 30% of the overall sum of the project.

These « precious euros », we propose you to use them for other things, making your own pose, and we have provided many aids for this realization.

A basic training for the installation of your RESIMARMO® soil accompanies each of you during the duration of its project. It explains to customers, even without special skills, how to install its marble gravels.

To help you succeed, one documentation and of the advices are ready to accompany you throughout the laying of your marble gravel.

  • Immediately after the signature of the order and the payment of the first installment, a complete technical documentation is sent to you automatically.
  • Several videos can be downloaded from our websites to help you prepare your project.
  • You also have a « Technical Hotline » by e-mail or you can ask all your questions. This « Hotline » can also answer by phone for an urgent need if necessary. 

Our primary concern is your satisfaction in the realization of your project. Like many of our customers, you will be satisfied with our installation assistance services.

 

Trust us and to you trust

(we will always be there by your side, during

the duration of your RESIMARMO® floor covering installation.)

 

The phases of work - Paragraph separators-(blue)

 

Follow the different phases of work below…

[metaslider id=204]

methods of preparing surfacesProduced resimarmoStairs and terracesApplication resimarmoComplementary informationsSidewalk stairs terraces

These are the phases of work RESIMARMO®. You have seen that it is quite possible to do it yourself ! It takes just a little care and a little patience in the different phases of laying.

The substrate must be cohesive and free from dust. It must also be stable and must not « work » after the installation of RESIMARMO®. It is imperative to saturate it with a primer (the anhydride screeds are for example very absorbent). Otherwise, the resin may be absorbed by the support and therefore not be available to bond the marble aggregates. Smooth substrates such as tiles (yes, it is possible) or floor resins (also possible) must be sanded beforehand. Check that all the tiles are still adhering by striking them with a metallic object. Wooden floors (yes, it is still possible) must be perfectly stabilized. The substrate must be sound, dry and free from any moisture. The decking floors must be waterproofed. Outside the profiles must be fixed so as to allow the water to pass from below. If the support does not have a slope or counter-slope it must be drilled to remove the water retention.

In a bathroom a liquid screed must be applied to protect the support from possible water damage. In addition, the marble aggregate perfectly matches the reliefs: it is the ideal floor covering for your renovation of floors.

 

What do you think ?

Do you feel able to do the laying of your flooring yourself ?

If you answer yes, then you will save your money.

You will have for much cheaper, a sublime flooring!

 

Go here to order your RESIMARMO® exterior flooring.

 

 

 

Logo of color

TECHNIQUES

The techniques

 

 

The techniques - push on the equalizer during spreading RESIMARMO

Push on the equalizer during spreading RESIMARMO.

 

 

 

The techniques RESIMARMO

The techniques of preparation of the support:

Different techniques for preparing the support can be envisaged according to its state, such as for example:

  • Chemical stripping,
  • Mechanical cleaning,
  • Scarification,
  • Sandblasting,
  • High pressure cleaning,
  • Thermal stripping.

The techniques of poses

The general condition of the substrate determines the most suitable techniques to use.

  • Troweling,
  • Fixing to the trowel,
  • Pose to the rule,
  • Installation with guides,
  • Final finishing by hand,
  • Final machine finishing,
  • Final surfacing with the electric helicopter,

 

The techniques for stable supports

How do we do it ? How to apply the right techniques ?

  1. Make a lean or
  2. Make a reinforced concrete screed.
  3. Make a patch,

Different RESIMARMO® products are used.

 

The techniques - All the useful material for a-team of three workers

All the useful material for a team of three workers.

RESIPRIMER (adhesion primer, it allows to favor adhesion to the support).

RESIFIX (single component polyurethane resin, mixed with marble aggregate, creates the RESIMARMO® compound which can be applied to a rigid and solid surface).
RESIMPER (solves problems related to poor sealing).
RESIPROTEC (polyurethane resin, it constitutes the finishing step in the case of use with an intense passage).
RESITEX is a geotextile used to reinforce the soil on which RESIMARMO® is applied
The profiles define the area of ​​application of RESIMARMO® and serve as a reference in order to guarantee a constant coating thickness. It is advisable to use anodised aluminum profiles. The thickness of the profiles can be between 8 and 15 mm.
The greater the surface irregularity, the thicker the profile. They will be cut to the exact measurement to obtain a high quality end result, which also includes the cutting of the angles at 45 °. So much for the curbing techniques.

To fix the profiles, a hot glue gun is the most suitable method. The glue gun is an electric tool used to melt and apply hot-melt glue into sticks. A trigger advances the glue stick as it melts. This method of sizing is to be preferred because once applied, the adhesive solidifies quickly. Thanks to its fast setting, it allows to correct the variations in the level of the support, on which RESIMARMO® will be applied.

You will see more precisely the different phases of work for the installation of the RESIMARMO® product here.

Do not hesitate to try the adventure yourself, you will be accompanied throughout your production, by a paper documentation and explanatory and explicit videos. In addition you can always contact us urgently for advice at the following number:

 

 

The techniques - Phone-number

 

 

Or by e-mail at the following address:

technical.service@resimarmo.com

 

Good achievement and success of your project. Accompanied by our services, we wish you every success!

The whole team of RESIMARMO® UK.

 

 

 

The techniques - Logo of color

 

RESIPROTEC

 

Coating terrace pool (Luberon in France)

Coating terrace pool (Luberon in France).

 

RESIPROTEC

 

RESIPROTEC is steady, transparent, he has high mechanical performances similar to a compound hardening to the humidity. The resin of polyuréthane aliphatique allows an excellent resistance the UV. It is a product of strong, supple coatings, that resists the abrasion well and to wear. He/it doesn’t fear the chemicals, the solutions diluted of acids and bases, of chlorinated water, of salt, fuel and lubricants of all sorts. He/it creates an excellent protection of surface of soils submitted to an intense wear. RESIPROTEC doesn’t whiten under the inclemencies, he doesn’t change a very color when he is exposed to the UV rays, he is therefore perfectly advisable for the outside applications. For the application he/it is recommended to have a good environment of ventilation.

 

RESIPROTEC-1RESIPROTEC-2RESIPROTEC-3

APPLICATION

Can be applied by roller, brush or airless. Although not mandatory, it is recommended to use the full contents of each pot. If this is not the case, make sure it is completely watertight after use (risk of solidification). It is possible to adjust the viscosity with RESIGLIDE. Never dilute with solvents reactive with polyurethane (eg universal solvent or with alcohols).

Uses

  • Aires of parking to intense traffic, garages, parking of cars.
  • Excellent for the waterproofing.
  • Restoration of old domes of fiberglass, flat roofs, polycarbonate, other composite materials, etc.
  • Floors of concrete and polymeric.
  • Tightness and protection of the metallic structures, floor-coverings printed matter, micro cements, leveling maltine, mosaics, mineral gravel.
  • Produced of supple slip to quartz, the corindon, of rubber, of the dust, etc.

Advantages

  • A product to unique component, easy to use.
  • No possible mistakes therefore not of lost time.
  • Stability of the colors in the time under the UV.
  • Excellent resistance to the abrasion and to wear.
  • Fast hardening and protection of the paintings.
  • Good capacity of etandage.

Available colors

Transparent (the version no brilliant is available while using the » Matting Additive » (to see technical card above).

Technical certifications obtained

  • ETA : European Technical Assessment document Nº 06/0263 – CE marking : 10 and 25 years.
  • Flat roof external fire exposure Nº 06/32301345
  • Roof 45º fire resistance Nº 08/32309237
  • Root perforation no RESIMPER Nº 07/32305556 with RESIMPER Nº 07/32305557
  • Abrasion Taber Nº 10/101.729-1626
  • QUALICONSULT : Notebook of Technical Terms CCT nº 50 712 004 096 MS
  • BBA : British Board of Agreement 11/4836
  • IETcc report 19.221-II (2007) on thermal resistance.

 

Technical certifications obtained

 

 

CONTACT FORM

Visitor contact form
  • For maximum security on our sites, you are invited to solve this puzzle. Write your answer below the CAPTCHA field.

 

 

 

 

Logo of color

 

 

RESIMPER

 

Beaches of pool in aggregates of marbre-(Geneva)

Beaches of pool in aggregates of marbre-(Geneva).

 

RESIMPER

 

RESIMPER

RESIMPER is ready to use and apply to cold weather. He is presented under liquid shape, but in the strong state he/it creates a membrane without joint and doesn’t fear the humidity. Elastic and « breathing », the surfaces follow the movements of the land. Non-skid, he/it is resistant to the abrasion and to the shocks, to the inclemencies as well as to the chemicals. RESIMPER adheres to the support of the underside very well, even to different geometries or difficult of access, RESIMPER doesn’t need dilution (RESIGLIDE authorized max. 10%).
Applied with a brush or with a roller, It permits an adherent hangs specific. It is recommended for the critical zones as corners, the sky lights, the sides, the overlaps.
Not to apply on humid surfaces (trap of points of dew).

Uses

Applicable on: old bituminous girdles or slates bituminous, former acrylic coatings, slates, concretes, mortars, bricks, sandstone made of fibro-cement, shingles of wood, ceramic, oxidized asphalt, wood, steels, zincs, aluminiums, fiberglass, composite materials, etc.

Main applications

  • Terraces, balconies, isolated roofs, roofings, or metallic panel, etc.
  • Kitchens, bathroom, (showers) and places difficult of access by the inside.
  • Parking lots, local techniques, flat roofs or in slope.
  • Stairs, tribunes, steps.
  • Channels and deposits of water.

 

RESIMPER-1

RESIMPER-2

RESIMPER-3

 

 

Ceaning and maintenance

A maintenance work must be carried out regularly on the treated roofs according to the intended use.

This work includes the following tasks :

  • Leaf removal
  • Grass, dirt, moss and other vegetation removal
  • Keeping storm water system in good working order.
  • Ensure gratings are in place, in order to prevent gutter obstructions.
  • Check proper condition of several structures (flashing, seams, retaining walls…)
  • Verification of possible damages due to improper use.

If an esthetic appearance of the roof is an important issue, it is essential to regularly clean the surface with water (some mild detergent may be added), according to the use.

It may be necessary to reapply decorative layers (RESIMPER, RESIPROTEC) if they are worn out due to traffic, weather, corrosion, etc.

For stain removal, a surface treatment with RESIGLIDE or isopropyl alcohol may be attempted. Strong acids are totally inadequate. Some solvents may damage the membrane. If this happens, the affected area has to be cut and repaired with a new RESIMPER application.

Technical certifications obtained

  • ETA : European Technical Assessment document Nº 06/0263 – CE marking : 10 and 25 years.
  • Flat roof external fire exposure Nº 06/32301345
  • Roof 45º fire resistance Nº 08/32309237
  • Root perforation no RESIMPER Nº 07/32305556 with RESIMPER Nº 07/32305557
  • Abrasion Taber Nº 10/101.729-1626
  • QUALICONSULT : Notebook of Technical Terms CCT nº 50 712 004 096 MS
  • BBA : British Board of Agreement 11/4836
  • IETcc report 19.221-II (2007) on thermal resistance.

 

RESIMARMO Technical Certifications

 

 

CONTACT FORM

Visitor contact form
  • For maximum security on our sites, you are invited to solve this puzzle. Write your answer below the CAPTCHA field.

 

 

 

 

 

Logo of color

RESIFIX

 

RESIFIX - Beaches of pool with reasons

Beaches of pool with reasons.

 

RESIFIX

 

RESIFIX

The RESIFIX resin is a compound binder of polyuréthane, liquid elastomer, aliphatiques, even hardening to the humidity, solvent, calm to cold weather. The product « measured out » well with aggregates of marble, produces a flexible dough that permits to achieve coatings of soils as inside as outside. There is not an ungainly joint, the surface is flexible, non-skid and permits an excellent drainage. The different hues of marble used offer the possibility to get multiple effects of color, the geometric motives, the strips or the changes of coloration in a same surface.

 

Resin pot RESIFIX

Resin pot RESIFIX.

 

 

RESIFIX-1

RESIFIX-2

REQUIREMENTS OF SUPPORT

RESIFIX has a good cohesion and a good resistance to the compression, he lands on soils without dirty humidity or ascents of humidity.
The support must be clean and dry, it must be exempt of traces of oil, of grease, of wax, milt of cement, or of all something else that could compromise a good adhesion of the compound.
Of the temperature of the substratum must be consisted between 10ºC and 25ºC.
For the new tiles of concrete freshly streams, you should wait for at least 21 days before applying the product.

The surface to be treated must have the following minimum mechanical strength:

  • Minimum cohesion 1.5 MPa.
  • Compressive strength: greater than 25 MPa.

The substrate must be free from water or water vapor pressure (max. 4%).
The surface must be clean, dry and free of friable or little adhesion. It must also be free of oil, grease, wax, or any substance that can affect adhesion.
For more information on the treatment of singular points, contact our technical department.
The delimitation of the application space can be ensured by means of an aluminum profile previously fixed on the support.
The substrate temperature must be between 10ºC and 25ºC.
If there is a suspicion of moisture in the substrate, a suitable primer (RESIPRIMER) should be used.
on new concrete or mortar, wait at least 21 days before applying the RESIMARMO® system.

ATMOSPHERIC CONDITIONS

It is preferable that the ambient temperature is between +10 and + 30ºC. The relative humidity of the air between 30% and 80%

DOSAGE

The dosage of the mixture of RESIFIX with the aggregates is as follows:

AggregatsRESIFIX
Non-porous regular3 à 5 %
Irregular porous5 à 7 %
AggregatsRESIFIX

Technical certifications obtained

  • ETA : European Technical Assessment document Nº 06/0263 – CE marking : 10 and 25 years.
  • Flat roof external fire exposure Nº 06/32301345
  • Roof 45º fire resistance Nº 08/32309237
  • Root perforation no RESIMPER Nº 07/32305556 with RESIMPER Nº 07/32305557
  • Abrasion Taber Nº 10/101.729-1626
  • QUALICONSULT : Notebook of Technical Terms CCT nº 50 712 004 096 MS
  • BBA : British Board of Agreement 11/4836
  • IETcc report 19.221-II (2007) on thermal resistance.

 

RESIMARMO Technical Certifications

 

 

CONTACT FORM

Visitor contact form
  • For maximum security on our sites, you are invited to solve this puzzle. Write your answer below the CAPTCHA field.

 

 

 

 

Logo of color